Results Found For “Mossberg Model Vintage Gun Parts”:
Photo
Info
Details
Price / Condition
ProMag Mossberg 12 Gauge 7 5/8" Action Slide Tube Assembly
Location: Amazon Warehouse
Brand/Style: Mossberg Model
List Price: $68.68
Part#: PM194
Shipping: Click
Return Policy: Returns Accepted
$41.08 New » Click for Details
AIM 4x32 Compact Mil-Dot Reticle Rifle Scope with Ring Mounts Fits Weaver Picatinny Rails Fits Mossberg 715t MMR FLEX-22 , Hi-Point Carbine , Kel-Tec SU16 SU22 , Remington Model 597 Rifles
Location: Amazon Warehouse
Brand/Style: Mossberg Model
Shipping: Click
Return Policy: Returns Accepted
$31.25 New » Click for Details
Limbsaver 10201 Recoil Pad Mossberg
Location: Amazon Warehouse
Brand/Style: Mossberg Model
List Price: $58.40
Part#: 10201
Shipping: Click
Return Policy: Returns Accepted
$29.95 New » Click for Details
Shockwave Technologies Raptor Grip for Mossberg 500 and Maverick 88 12-Gauge and 20-Gauge Pump-Action Shotgun Birdshead Fixed Stock Handle
Location: Amazon Warehouse
Brand/Style: Mossberg Model
List Price: $27.95
Part#: STRGM500
Shipping: Click
Return Policy: Returns Accepted
$25.95 New » Click for Details
Mossberg Model 46MB Adjustable Trigger Assembly
Location: Dickson, TN, USA
Brand/Style: Mossberg Model
Shipping: $4.00
Return Policy: Returns Accepted
$19.95 » Click for Details
Uncle Mike's Quick Detachable Mossberg 500 12-Gauge Bolt Set Sling Swivels (Blued, 1-Inch Loop)
Location: Amazon Warehouse
Brand/Style: Mossberg Model
List Price: $21.95
Part#: 18102
Shipping: Click
Return Policy: Returns Accepted
$14.14 New » Click for Details
Hogue Stock Forend Adapter Nut For Mossberg 835 Model & 6.75-Inch Forend Tubes
Location: Amazon Warehouse
Brand/Style: Mossberg Model
List Price: $9.99
Part#: 5020
Shipping: Click
Return Policy: Returns Accepted
$10.29 New » Click for Details

Mossberg Model Vintage Gun Parts Details

OverMolding provides the ultimate in a comfortable, non-slip, super smooth attractive finish that is durable and extremely quiet. The exclusive Cobblestone texture further enhances all Hogue stocks by providing an efficient non-slip, non irritating stippling pattern. OverMolded Stocks are constructed by molding a super strong, rigid fiberglass reinforced skeleton or "insert" that precisely fits the guns' action. This rigid skeleton is then OverMolded with a durable but soft synthetic elastomer (rubber). During the heat and extreme pressure of injection molding the elastomer adheres chemically as well as mechanically to the skeleton, resulting in a permanent bond between the rubber and the insert. The super strong skeleton gives the stocks their strength, and the precise molded dimensions provide a perfect drop-in fit of your rifle or shotgun. The state of the art elastomer material used on Hogue stocks won't harden with age and is virtually impervious to all oils and solvents found around firearms, providing years of dependable service.

Mossberg 12 Gauge 7 5/8" Action Slide Tube Assembly

SPECIFICATIONS Magnification: 4X Tube Diameter: 1" Objective: 32 mm Eye Relief: 3" Exit Pupil: 8 mm FOV (feet at 100 yds.): 36.6 M.O.A.: 1/4 Finish: Matte Black Lens Coating: Blue Length: 7.75" Weight: 11 oz. FEATURES Milled from one solid piece of aircraft grade aluminum to withstand constant heavy recoil Fog proof and shock-resistant housing Nitrogen charged with weather resistant seals Blue fused multi-coated lens provides superior light transmission, resolution and scratch resistance Windage and elevation adjustment 3 Inch eye relief provides safety from heavy recoil and enables fast target acquisition Weaver / Picatinny 1913 ring mounts include All items are Brand New w/ Full Manufacture Warranty ____________________________________

The LIMBSAVER® Precision Fit Recoil Pad is the #1 recoil pad on the market today! It is an incredible product that has been shown to reduce shotgun recoil shock up to 50% over standard manufacturer stock pads. It is built for all weather conditions and incorporates Anti-Muzzle Jump Technology. Stop the pain now! Less recoil means more shooting, without the soreness and discomfort at the end of the day. This model #10201 fits these stocks (information is listed in Manufacturer, Gun Model, Stock Material, SVL Product #, and Special Notes order): (Browning, Citori English Stock yr 1981, Wood, 10201, shave required); (Mossberg, All 5-3/16" stocks {500, 500A, 835, 930, & 935}, Synthetic, 10201); (Mossberg, Maverick 88 {12 gauge only}, Synthetic, 10201); (Winchester, Coyote, Wood, 10201, shave required). **Firearm manufacturers often change stock specifications without notice, and some consumers have adjusted their stock to affect the length of pull, thereby changing the dimensions of the butt of the stock. Please check the dimensions in the product features against your particular gun model and request a template from the seller if there is still a question.

The Shockwave Technologies Raptor Grip is a fixed stock for pump-action shotguns. [Note to Amazon agents: This item is specifically listed on Amazon's list of Examples of Permitted Listings under Certain gun parts and accessories, such as: Fixed stocks.]

With that out of the way, the Raptor Grip is MADE IN AMERICA. (Beware of low-quality Chinese counterfeits.) With its enhanced texture, you gain a great hold on your weapon. And its glass-filled polymer construction is virtually indestructible.

The Raptor Grip is a new style of bird's head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.

The Raptor Grip is molded of a super-tough glass-filled polymer and fits:
* Mossberg 500 12-gauge firearms (aka 500A)
* Mossberg 500 20-gauge firearms (aka 500C)
* Mossberg 590 and 590A1 firearms
* Mossberg 510 Mini firearms
* Mossberg 835 firearms
* Mossberg 535 firearms
* Mossberg 600 (New Haven) firearms
* Maverick 88 12-gauge firearms
* Coast to Coast model CC 660 Master Mag (12-gauges and 20-guages)

Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Order yours today. Yes, mounting hardware is included. (Requires a 1/4″ hex wrench for installation.)

Note that there is no predefined hole for a sling swivel stud on the Raptor Grip. This allows you to put your sling swivel wherever you want it on the grip-not just where we think it should go. The Raptor Grip is 100% solid. Be sure to drill a 1/8″ pilot hole.

Uncle Mike's Sling Swivels - QD MOSS 500 Bolt Set, 1in 1810-2

OverMolding provides the ultimate in a comfortable, non-slip, super smooth attractive finish that is durable and extremely quiet. The exclusive Cobblestone texture further enhances all Hogue stocks by providing an efficient non-slip, non irritating stippling pattern. OverMolded Stocks are constructed by molding a super strong, rigid fiberglass reinforced skeleton or "insert" that precisely fits the guns' action. This rigid skeleton is then OverMolded with a durable but soft synthetic elastomer (rubber). During the heat and extreme pressure of injection molding the elastomer adheres chemically as well as mechanically to the skeleton, resulting in a permanent bond between the rubber and the insert. The super strong skeleton gives the stocks their strength, and the precise molded dimensions provide a perfect drop-in fit of your rifle or shotgun. The state of the art elastomer material used on Hogue stocks won't harden with age and is virtually impervious to all oils and solvents found around firearms, providing years of dependable service.



More Specific Categories: